How to Use Topdon Rlink X3 with GM Techline Connect?

on

 Tutorial: How to set up and connect Topdon Rlink X3 J2534 adapter with Chrysler OEM software (wiTech 2.0).

Tips: You need to install the Chrysler OEM software before use. If it’s not installed yet, you can download and install it from the official Chrysler website.
https://www.mopartsp.com/login

1. Open the RLink Platform. Clicking “Login to the Account” will automatically redirect you to the login page. Log in to the account bound to the RLink X3 device.
Note: After binding and activating the device and downloading the driver, you can use the RLink X3 device to perform vehicle diagnostics without opening the RLink Platform later.

Use Topdon Rlink X3 with Chrysler wiTech 2.0 1

Use Topdon Rlink X3 with Chrysler wiTech 2.0 2

2. Click the settings icon. Then click About to check whether there is an update for the RLink Platform. If yes, click Update.

Use Topdon Rlink X3 with Chrysler wiTech 2.0 3

 

3. Click Driver > Driver Download. Click GM and click Download to download the driver.

Use Topdon Rlink X3 with GM Techline Connect 1

Use Topdon Rlink X3 with GM Techline Connect 2

4. Click Driver > Driver Info. Then click GM to configure the driver mode.

Use Topdon Rlink X3 with GM Techline Connect 3
5. When using RLink X3 devices, select RLink as the diagnostic interface on the OEM software. If you are connecting to the original VCI or third-party VCI, open the OEM software and select the original VCI or third-party VCI as the diagnostic interface. This driver will not have any impact.

Use Topdon Rlink X3 with GM Techline Connect 4

6. Double click the icon to open the Techline Connect.（You can also access the Techline Connect from the official website homepage for diagnostic programming.）

Use Topdon Rlink X3 with GM Techline Connect 5

7. Enter the account that you purchased on the official website of GM.

Use Topdon Rlink X3 with GM Techline Connect 6

8. After entering the diagnostic page, click the ‘connect vehicle’ button.

Use Topdon Rlink X3 with GM Techline Connect 7

9. Then click the “Change Device” button.

Use Topdon Rlink X3 with GM Techline Connect 8
10. When multiple drivers appear, select the RLink driver and click the “Continue” button.

Use Topdon Rlink X3 with GM Techline Connect 9

11. When the device is properly connected, the VCI icon will change from gray to blue.

Use Topdon Rlink X3 with GM Techline Connect 10

12. Once the VCI is successfully connected, the vehicle will be automatically identified. After the identification is completed, the vehicle information will be displayed.

Use Topdon Rlink X3 with GM Techline Connect 11

13. After the vehicle is successfully identified, select SPS programming or GDS2 diagnosis according to your needs. Note: The display of these two functions is related to the purchased account.

Use Topdon Rlink X3 with GM Techline Connect 12

 

Comments

Post a Comment